If you are looking for HP AMP 130 driver, so you have come to the right place. Here you can find it for all operating systems.
You may have noticed that your HP AMP 130 printer is not responding to commands, or that it stops working in the middle of an important job. You may have given the printer the command to print but nothing happened. If this has happened to you, it is time to upgrade the driver on your computer. To download and install a new HP AMP 130 driver, you can follow the instructions below.
If you have HP printer, you’ll need to install a HP AMP 130 driver. This software enables your computer to connect with the printer’s hardware and communicate with the software. The printer driver stores default print settings, but you can also change these settings to suit your particular needs. This software helps you print documents and other materials with your chosen printer. It is recommended that you install the latest version of the driver for HP AMP 130 printer.
|Category||HP Printer Drivers|
|Language||English, French, German, Spanish, Italian, Polish, Ukrainian, Russian|
|Operating systems||Windows / Mac OS / Linux|
The HP AMP 130 is a modern multifunctional device that is ideal for both specialized and amateur use. A distinctive feature of the printing device is the presence of the device for reading different types of drives (Compact Flash, Memory Stick Duo, MMC. SD, etc.). It should also be noted the original ink, which can withstand the original saturation of colors while preserving in a photo album for 300 years.
The main advantages of the HP AMP 130 printer:
Users need to go through the procedure of installing specialized software before using the multifunction device. Not only the possibility of working with the device, but also the efficiency of its functionality will depend on it. Therefore, you should download a high-quality and up-to-date driver for your HP AMP 130 printer. On this page of our site every visitor can download the necessary software.
The HP AMP 130 driver from the well-known Hewlett Packard manufacturer is a monochrome laser printer for home printing. It has a stylish compact design and high speed printing. This device is easy to use and can print at 1200×600 dpi resolution on almost any A4 paper. The device runs on a cartridge MLT-D108S, which has high performance and reliability. To connect this printer to your computer, download the driver for HP AMP 130 from our website.[quick_offer id=”1360″]
For delivering and repeating high contrast records, the HP AMP 130 printer comes stacked for bear, with a 500MHz processor and 128MB of RAM installed. HP rates its first-page-out rate (the time it takes the principal page to get done with printing amid a multipage print work) at 8.5 seconds, however amid our tests it showed improvement over that. (More on that later.) The unit has a 35-sheet programmed record feeder (ADF) for unattended duplicating and faxing, and also bolster for programmed duplexing, for unattended two-sided printing. A 100Mbps Ethernet interface makes it available to every one of the workstations in your office, and HP’s ePrint administration permits you to send archives to this printer from about any cell phone anyplace on the planet through a printer-particular email address. (More on that later, too.) You should place this machine where you can link it to a switch or nearby PC; it doesn’t bolster Wi-Fi.
|Windows 10, 8, 7, Vista and XP on 32-bit, 64-bit||Download|
|Mac OS X||Download|
Here is the driver for the HP AMP 130 printer. Already complete and fully ready for download version 1.00. These “drivers” are adapted to multilingual users, but in the settings you can place a checkbox in any language, it and the installation window will pop up.
Operating systems that will be suitable for the HP AMP 130 printer drivers:
The drivers are placed in the EXE file, weighing twenty megabytes for Windows systems. For Mac the weight ranges from 7.8 to 18 MB, depending on the discharge and modification of the operating system.
The drivers for HP AMP 130 already contain a program for printing, scanning, and color adjustments. If you have several identical printing devices connected to your computer, the universal driver will allow you to operate all at once.
How to Install Printer HP AMP 130 Drivers in Windows:
- Please you must first download the HP AMP 130 driver on the links were provided.
- Once the driver is downloaded, Attach the USB printer to the USB laptop / computer and the printer is turned on.
- After that just open the driver file that you have downloaded, wait until the installation process is complete.
- To check the success or failure please open your Microsoft Word file and press CTRL + P, then by default in the Printer Name emerging type of printer installed.
How to Install Printer HP AMP 130 Drivers in Mac Os X:
Installing the printer driver HP AMP 130 on Mac OS X needs to be done, if notebook or your PC is not directly recognise the device you have connected printers.To do so you can follow the steps below:
- Please open System Preferences
- Open Print & Fax
- Click the plus sign (+) under the printer panel section (To add Printer)
- Click on the button Failure Mac OS X, so it displays all types of printers available
- Choose type of printer that you want to install and click Add